Filter

INTOPORE AR

It is a Biocompatible Eco Plaster, High Strength Lightweight Dehumidifying Plaster, pre‑packaged in powder form for interior and exterior use, compliant with UNI EN 998-1.

INTOPORE AR is totally free of cement or compounds belonging to the clinker group. It consists of a mixture of pure expanded mineral sands of low specific weight, screened with a continuous grain size range from 0 to 5 mm. The only binder included is Pure Natural Hydraulic Lime NHL 5 in accordance with UNI EN 459-1. NHL 5 lime, white in colour, is produced by firing siliceous limestones at temperatures below 1,250° C and reduced to powder by the extinguishing of calcium oxide alone, without the addition of pozzolanic materials or hydraulic binders of any kind.

DOWNLOAD DATA SHEET

Fields of application

INTOPORE AR is specifically designed for the formation of dehumidifying plasters on new and old masonry, for low and high thicknesses from 2 to over 12 cm. Easily worked with the techniques traditionally used in the application of lime plasters. INTOPORE AR can be applied directly to vertical and horizontal surfaces consisting of solid brickwork, load-bearing hollow bricks, light hollow bricks, mixed bricks, stone and tuff. For all compact or poorly absorbent surfaces, such as solid or hollow concrete blocks and expanded clay granules, cellular conglomerate blocks, lime or cement-based subbases, reinforced concrete or magnesium wood structures, the use of INTOPORE AR must be preceded by the application of SPRIZZO PONTE DI ADESIONE.

Technical Data

PRODUCT TYPE

Renewal mortar (R) for indoor and outdoor use in accordance with EN 998-1

APPLICABLE THICKNESS PER LAYER

2-3 cm

GRAIN SIZE CURVE EN 1015-1

0-5 mm

PACKAGING

25 kg bag

APPARENT BULK DENSITY IN A PILE

Average 664 kg/m3

PALLET

48 bags (1,200 kg)

CONSUMPTION

7 kg/m² approx. per 1 cm thickness

STORAGE

18-24 months in original packaging in a dry place

Downloads

Data sheet