Filter

INTOCOLOR

A Biocompatible Eco Plaster, pigmented with natural powders, pre-packaged in powder form for interior and exterior use in accordance with UNI EN 998-1.

INTOCOLOR is totally free of cement and compounds belonging to the clinker group and consists of a mixture of pure limestone sands, screened with a continuous grain size range from 0 to 2.5 mm. The only binder present is Pure Natural Hydraulic Lime NHL in accordance with UNI EN 459-1. Lime NHL, white in colour, is produced by firing siliceous limestones at temperatures below 1,250° C and reduced to powder by extinguishing the calcium oxide alone, without the addition of pozzolanic materials or hydraulic binders of any kind.

DOWNLOAD DATA SHEET

Fields of application

INTOCOLOR is specific for the formation of dehumidifying coloured plasters on new and old masonry, for low thicknesses of up to 4 cm, for the reinforcement of mortar joints and as bedding mortar in flush stonework.

Easily worked with the techniques traditionally used in the application of lime plasters. INTOCOLOR can be applied directly to vertical and horizontal surfaces consisting of solid brickwork, load-bearing hollow bricks, light hollow bricks, mixed bricks, stone and tuff. For all compact or poorly absorbent surfaces, such as solid or hollow concrete blocks and expanded clay granules, cellular conglomerate blocks, lime or cement-based subbases, reinforced concrete or magnesium wood structures, the use of INTOCOLOR must be preceded by the application of SPRIZZO PONTE DI ADESIONE.

Technical Data

PRODUCT TYPE

General purpose mortar (GP) for interior and exterior use compliant with EN 998-1

APPLICABLE THICKNESS PER LAYER

1-2 cm

GRAIN SIZE CURVE EN 1015-1

0-2.5 mm

PACKAGING

25 kg bag

APPARENT BULK DENSITY IN A PILE

Average 1400 kg/m3

PALLET

48 bags (1,200 kg)

CONSUMPTION

14 kg/m² approx. for 1 cm thickness

STORAGE

18-24 months in original packaging in a dry place

Downloads

Data sheet